Viking Tactics VTAC 1.75 Inch Rigger's Belt-Coyote & Black-Choose Size & Color

Description

Viking Tactics 1.75″ Rigger’s Belt-Coyote & Black
We
are a 100% Veteran owned small business offering the highest quality
gear with excellent service to all our customers. Please visit our store
to find a great selection of the finest tactical gear available on the market.
A2Z Gear is an authorized Viking Tactics Distributor, ID #1691.
Viking Tactics Rigger’s Belt
The Viking TacticsRigger’s Belt is made of a double thickness of webbing to ensure a solid belt. It was designed to go inside the Brokos Battle Belt or to be worn as a standalone duty belt. It closes via an AustriAplin belt buckle. There is an emergency rappel triangle sewn into the belt that is secured by a nylon strap and velcro when not in use. The loose end of the belt is also secured by  hook and loop once you have the size fine tuned for your size.
Please read below for sizing information!
When buying a belt, it is important to select the correct size based upon an accurate measurement.
Your belt size is not the same as your pant or waist size
;
because your belt goes around you and your pants, your tucked in shirt, and your underwear, your belt size is usually
1 or 2 inches larger
than you pant or waist size. The leading manufacturers of quality
belts share the same standard for measuring and labeling belt sizes.
This measure is based upon the length of the belt strap only, and does
not include the buckle.
Your belt size is not the same as your pant or waist size, if you are unsure of your belt size, we have translated the sizing to your pants below:
Belt Sizes (Industry Standard): M (32-34), L (36-38), XL (40-42), XXL (44-46)
***Check other belts in your closet that fit, these are industry standard sizes.**
Translation to your Waist/Pant Size: M (28-30), L(32-34), XL (36-38), XXL (40-42), XXXL (44-46), XXXXL, (48-50)
If you are still not sure, then here is the actual measured length of the belt:
Usable lengths” M (33-36″) L (37-40″) XL (41-44″) XXL (44-47″)
For those of you that are purchasing your VTAC Rigger’s belt to go with your VTAC Battle Belt, here are more measurements to consider:
VTAC Battle Belts are sized to go together with the VTAC Rigger’s Belt. If you purchase a large in one, then you should purchase a large in the other one as well. Please take the time to email if you are unclear, however the sizing above should be adequate to figure out your best fit.
APPX LENGTH OF VTAC BATTLE BELT: Med 31 1/2 “; Large 35″, XL 38″, XXL 41”
The Coyote colored belt is currently manufactured with a gray buckle, the black belt comes with a black buckle.